EIT with the D-bar method: smooth and radial case
This page contains the computational Matlab files related to the book
Linear and Nonlinear Inverse Problems with Practical Applications
written by Jennifer Mueller and Samuli Siltanen and published by SIAM in 2012.
You can order the book at the SIAM webshop.
This page is related to a smooth and rotationally symmetric conductivity.
The D-bar method is a reconstruction method for the nonlinear inverse conductivity problem arising from
Electrical Impedance Tomography. This page contains Matlab routines implementing the D-bar method
for a smooth and rotationally symmetric conductivity.
Note carefully that although we use the rotational symmetry of the conductivity to speed up some computations,
the reconstruction process including the solution of the D-bar equation is two-dimensional, not one-dimensional.
Please download the Matlab routines below to your working directory and run them in the order they appear.
Definition of the example
The first example concerns a rotationally symmetric and smooth conductivity that equals one near the unit circle.
Outside the unit disc the conductivity has value 1.
The following file defines a rotationally symmetric and smooth conductivity in the unit disc: sigma.m.
Furthermore, this file implements the Schrödinger potential related to the conductivity: poten.m.
The Laplace operator appearing in the definition of the potential is implemented by finite differences in poten.m.
The following routines plot the conductivity and the potential, respectively: sigma_plot.m, poten_plot.m.
Please run the plot commands before continuing to make sure that everything is working properly.
You should see something like this:
Computation of the scattering transform via the Lippmann-Schwinger equation
Next we define a set of points in the k-plane for evaluating the scattering transform t(k).
Because of the rotational symmetry of this example, it is enough to choose k-values along the positive real axis:
the scattering transform is known in this case to be rotationally symmetric and real-valued. Why? See proof.
So please download and run this file: kvec_comp.m.
The above file kvec_comp.m defines a set of k-points and saves them to a file called 'data/kvec.mat'.
(Note that kvec_comp.m creates a subdirectory called 'data'. If you already created it before, Matlab will show
a warning. However, you don't need to care about the warning.)
When running the example for the first time you might just use the file kvec_comp.m as it is.
Later you might want to modify it to choose a different set of k-values.
Now that we have decided on the k-points, it's time to evaluate the scattering transform. Here we do it first by
'cheating', or by knowing the actual conductivity, because then there are no ill-posed steps involved.
Later we will compute the scattering transform also honestly from (simulated) EIT measurements.
This is the file that evaluates the scattering transform t(k) at the k-points: tLS_comp.m.
The result will be saved to a file called 'data/tLS.mat'. Here 'LS' refers to the use of the Lippmann-Schwinger
equation in the computation of the complex geometric optics solutions. tLS_comp.m needs these files:
green_faddeev.m, g1.m, GV_grids.m, GV_LS.m, GVLS_solve.m, GV_project.m, GV_prolong.m
In the names of the above files, 'GV' refers to Gennadi Vainikko, a numerical analyst who invented
the periodization-based algorithm used here for solving Lippmann-Schwinger type equations.
After running the files tLS_comp.m and Fq_comp.m, you can plot the results using tLS_plot.m.
You should see something like this:
In the above image, the scattering transform is not quite approaching the value t(0)=0 as k tends to zero,
although we know from theoretical results that this should be the case. Why such an error at zero?
This is because we only used the value M=7 for constructing the grid, which was then of size 128x128.
The Faddeev fundamental solution has a log(|k|) singularity at the origin, and the Lippmann-Schwinger
type approach has always difficulties near the origin. You can either use as big M value as your patience
and computer memory allows, or you can use the boundary integral equation approach below to compute
t(k) for k near zero.
The rule of thumb is: The Lippmann-Schwinger approach for computing t(k) is good for k somewhat
away from the origin, and the boundary integral approach for computing t(k) is good (only) for k near zero.
Simulation of EIT data
Since the conductivity is rotationally symmetric, the Dirichlet-to-Neumann map can be approximated by
a diagonal matrix in the Fourier basis. Why? See proof.
The diagonal elements have been precomputed and are simply given as a data file DN1eigs.mat.
The DN matrix is constructed by the routine DN_comp.m.
For details of the computation of the matrix elements, see
Mueller J L and Siltanen S 2003,
Direct reconstructions of conductivities from boundary measurements,
SIAM Journal of Scientific Computation 24(4), pp. 1232-1266. PDF (617 KB)
Computation of the scattering transform via the boundary integral equation
Here Hk_comp.m computes the matrices and H1.m is an auxiliary function. Note that the order Ntrig
of trigonometric approximation (in other words, the number of basis functions used) has been chosen
in the routine DN_comp.m above and saved to disc for later reference. The routine Hk_comp.m loads
Ntrig from file.
Running the routine Hk_comp.m is computationally the most demanding task on this page.
Do not be surprised if it takes 10 minutes or more.
Note that we save time by not running Hk_comp.m for too large values of |k|. Namely, the ill-posedness
of the EIT problem has the effect that the boundary integral equation cannot be solved for |k| exceeding
a certain threshold value R; for k values satisfying |k|>R the computation will produce numerical garbage.
Once Hk_comp.m has been run, we can solve the boundary integral equation for the traces of the
complex geometric optics solutions. This is done by the routine psi_BIE_comp.m, and the result is saved
to a file in the subdirectory 'data'. The next step is to evaluate the scattering transform by integration over
the boundary using the routine tBIE_comp.m.
We are now ready to plot the result and compare it to the scattering transform computed using the
Lippmann-Schwinger equation approach. Run the file t_plot.m, and you should see something like this: